tET-PD2POR2 # Ethernet I/O Module/tiny/ModbusTCP/2DIdry/2PhotoMos, ICP DAS

Providing various digital I/O functions, the tET/tPET series is an IP-based Ethernet I/O monitoring and control module. The module can be remotely controlled through a 10/100 M Ethernet network by using Modbus TCP protocol. Modbus has become a de facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. This makes the tET/tPET series perfect integration with the HMI, SCADA, PLC and other software systems. The functionality of the tET/tPET series is almost the same as the ET-7000/PET-7000 series. The tET/tPET series tiny Ethernet I/O modules support various I/O types, like photo-isolated digital input, relay contact, photoMOS relay, and open-collector output. The module can be used to create DI to DO pair-connect through the Ethernet. Once the configuration is completed, the tET/tPET series module can poll the status of the local DI channels and then use the Modbus/TCP protocol to continuously write to a remote DO device in the background. The tET/tPET series provides dual watchdog: CPU watchdog and host watchdog. The CPU watchdog automatically resets it-self when the built-in firmware runs abnormally. The host watchdog monitors the host controller (PC or PLC), and the output of the module can go to predefined state (safe value) when the host fails. For maximum space savings, the tET/tPET series is offered in an amazing tiny form-factor that makes it can be easily installed in anywhere, even directly embedded into a machine. It is equipped with two removable terminal block connectors for easy wiring, and features a powerful 32-bit ARM MCU to handle efficient network trafficking. The tPET series offers true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet cable to receive power from a PoE switch like the NS-205PSE. When there is no PoE switch on site, the tPET series accepts power input from DC adapter.

Cost-effective Ethernet I/O modules (Modbus TCP/UDP slave) Contains a 32-bit MCU that efficiently handles network traffic 10/100 Base-TX Ethernet, RJ-45 x1 (Auto-negotiating, Auto MDI/MDIX, LED Indicator) Includes redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC input Supports TCP, UDP, HTTP, DHCP, BOOTP and TFTP protocols Supports UDP responder for device discovery Supports web configuration and firmware update via Ethernet Isolated digital input and output Supports latched DI and 32-bit high-speed counter functions Supports I/O pair-connection through the Ethernet Dual-watchdog with power-on and safe value Tiny form-factor with easy DIN-Rail mounting RoHS compliant, no Halogen Low power consumption (about 1.7 W only)

Factory, Building and Home Automation Remote Maintenance

Models tET-P2POR2/tET-PD2POR2 tET-P2R2/tET-PD2R1 tPET-P2POR2/tPET-PD2POR2 tPET-P2R2/tPET-PD2R1 System CPU 32-bit MCU Dual Watchdog Yes Communication Ethernet Port 10/100 Base-TX, 8-Pin RJ-45 x1,  (Auto-negotiating, Auto-MDI/MDIX, LED indicator) - PoE (IEEE 802.3af, Class 1) LED Display S1 - PoE indicator (Green) System indicator (Red) E1 Link/Act indicator (Green) 10/100 M indicator (Yellow) Mechanical Dimensions 52 mm x 27 mm x 98 mm Installation DIN-Rail mounting Environment Operating Temperature -25 °C ~ +75 °C Storage Temperature -30 °C ~ +80 °C Humidity 10 ~ 90 % RH, non-condensing Power Requirements Power Input - PoE: IEEE 802.3af, Class 1 Terminal block: +12 ~ 48 VDC (non-regulated) Power Consumption 0.04 A @ 24 VDC for tET-P2R2 0.03 A @ 48 VDC for tPET-P2R2

Models tET-PD2POR2/tPET-PD2POR2 tET-PD2R1/tPET-PD2R1 tET-P2POR2/tPET-P2POR2 tET-P2R2/tPET-P2R2 Digital Input Input Channels 2 Input Type (Device) Dry Contact (Source) Wet Contact (Sink, Source) On Voltage Level Close to GND +10 VDC ~ +50 VDC Off Voltage Level Open +4 VDC max. Input Impedance - 10 k Ohm Counters Max. Count 4,294,967,285 (32 bits) Min. Pulse Width 0.15 ms Frequency Measurement 3.5 kHz (without filter) Overvoltage Protection - +70 VDC Isolation 3750 Vrms Effective Distance 500 M max. - Models tET-P2POR2/tPET-P2POR2 tET-PD2POR2/tPET-PD2POR2 tET-P2R2 tPET-P2R2 tET-PD2R1 tPET-PD2R1 Relay Output Output Channels 2 2 1 Output Type (Module) PhotoMOS Relay, Form A Power Relay, Form A (SPST N.O.) Load Voltage 60 VDC/VAC 250 VAC/30 VDC Max. Load Current 60 V/1.0 A (Operating Temperature -25°C ~ -40°C) 5.0 A/channel at 25°C 60 V/0.8 A (Operating Temperature +40°C ~ +60°C) 60 V/0.7 A (Operating Temperature +60°C ~ +75°C) Operate Time 1.3 ms (Typical) 6 ms Release Time 0.1 ms (Typical) 3 ms PWM 100 Hz Max.  (High/Low duty cycle range = 5 ~ 65,535 ms) 50 Hz Max.  (High/Low duty cycle range = 10 ~ 65,535 ms) Electrical Life (Resistive load) VED Long Life and No Sparking 5 A 250 VAC 30,000 ops (10 ops/minute) at 75 °C 5 A 30 VDC 70,000 ops (10 ops/minute) at 75 °C UL 5 A 250 VAC/30 VDC 6,000 ops 3 A 250 VAC/30 VDC 100,000 ops Mechanical Life - 20,000,000 ops. At no load (300 ops./ minute) Isolation 3000 Vrms

Note: Because the characteristic of relay, the relay-type modules are not suitable to use PWM for a long time.

tET Series tET-P2POR2 CR Tiny Ethernet module with 2-ch DI (Wet Contact) and 2-ch Form-A PhotoMos relay (RoHS) tET-PD2POR2 CR Tiny Ethernet module with 2-ch DI (Dry Contact) and 2-ch Form-A PhotoMos relay (RoHS) tET-P2R2 CR Tiny Ethernet module with 2-ch DI (Wet Contact) and 2-ch Form-A relay (RoHS) tET-PD2R1 CR Tiny Ethernet module 2-ch DI (Dry Contact) and 1-ch Form-A relay (RoHS) tPET Series tPET-P2POR2 CR Tiny Ethernet module with PoE, 2-ch DI (Wet Contact) and 2-ch Form-A PhotoMos relay (RoHS) tPET-PD2POR2 CR Tiny Ethernet module with PoE, 2-ch DI (Dry Contact) and 2-ch Form-A PhotoMos relay (RoHS) tPET-P2R2 CR Tiny Ethernet module with PoE, 2-ch DI (Wet Contact) and 2-ch Form-A relay (RoHS) tPET-PD2R1 CR Tiny Ethernet module with PoE, 2-ch DI (Dry Contact) and 1-ch Form-A relay (RoHS)

RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD  Fogyasztásmérés és leolvasás  USB konverter  ICP DAS HUNGARY

RS-232 - WiFi konverter, RS-485 - WiFi konverter,

ICP CON konverter    USR IOT konverter

Sinus-Elektrotechnikai Bt.   ICP DAS HUNGARY

RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC,  Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei,  Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON

All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

© 2018-2022  Sinus-Elektrotechnikai Bt.  Minden jog fenntartva.

A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.